Bob Gift Wish List

Feel like buying Bob a gift? Check out this list, and maybe you can find something.

New Boat. Doesn't have to be this one...one like it would be fine.

Hawaiian shirts. Large. The more colorful, the better.

	Captain's Log. This is a log Bob could use to keep track of boat stuff. You can get it from www.SeaRay.com and go to the The SeaRay Store.
	Dock Buddy. They are temporary docking lines made out of bungie cord. They attach quickly and easily. To get a better idea go to www.overtons.com and search for item number 33368. I'd like to have 2 or 4 of them, about 4 feet long.
	Hitch cover (SeaRay)
	Dead bolt hitch lock
	Dust Guard for the Tahoe. You can get this from Performance Products. Go to their site and search for reference number 3131
	Bearing Buddies for the boat trailer. I need four each, or two sets of two.
	Denise bought Bob a very nice Pinseeker Driver. So, now he needs the 3 and 5 woods to go with it. To go to the Pinseeker home page and get more information, click Here.

X10 Stuff. He doesn't have much, so just about anything would be great. Here are some ideas. Got this information from the SmartHome web site. These are only examples, and anything X10 compatible would be great! You can buy this type of stuff locally at Home Depot or Radio Shack.

	AM14A - This is a two-way version of the traditional X10 appliance module (2 pin) that has some new features that users have been asking about for years. With the new two-way feature, computer interfaces that can generate "Status Request", will receive an X10 signal back from the appliance module indicating it's status, ON or OFF. The new two-way module is much more sensitive to the X10 signal. It was able to receive and react to X10 signals at 50 mV, whereas normal X10 modules need 100 mV of signal strength. $32.99
	AM466 - Plug-in modules for controlling appliances such as fans, air-conditioners, dehumidifiers, coffee pots, stereos, TV's, etc. Controlled by any X10 programmable, wireless, or telephone controller. $13.99
	AM486 - Plug-in modules for controlling appliances such as fans, air-conditioners, dehumidifiers, coffee pots, stereos, TV's, etc. Controlled by any X10 programmable, wireless, or telephone controller. $12.99
	LM14A - This is a two-way version of the traditional X10 lamp module. This module has a "soft-start" feature. When an X10 signal is sent, the module will fade the lamp up from the off setting. Traditional lamp modules have always come on at full bright. The fade up and down takes about two seconds. The second new feature is that the new module remembers it's last dimmed setting. When an X10 "on" signal is now sent or when the lamp is turned on manually, the module will fade up the lamp to the point when it was last dimmed. With the new two-way feature, computer interfaces that can generate "Status Request", will receive an X10 signal back from the lamp module indicating it's status, ON or OFF. If the unit is on, but dimmed to some level, the two-way lamp module will only report back that it is ON, (it will not report back the dim level.) $32.99
	LM15A - X10 has for some time sold a screw-in Lamp Module but unfortunately its large size prohibited it from fitting in many types of light fixtures. Unlike other X10 modules, the new Socket Rocket (LM15A) Remote Controlled Screw-in Lamp Module has no code wheels. This allows for a very compact design. It is just 2 ½ inches long and 1 ¼ inches in diameter, with a 3/8 of an inch bump on one side. $19.99
	LM465 - Plug-in modules for incandescent lamps. Ideal for controlling bedroom, living room, and family room table lamps. Lamps connected to this module can be dimmed. Details: The Lamp Module responds to "All Lights On" command from any Controller or software set to its housecode. The Lamp Module has a feature called "local control". This feature enables you, at any time, to turn on the lamp plugged into the Lamp Module simply by turning the lamp's power switch off then on again. Features: Rated at 300W (incandescent). Dimmable through X10 controllers. $12.99
	SL575 - Eliminates the need to re-wire switch operated lights. This module screws into the socket before you screw the bulb in. Features: Dimmable through X10 controllers. $15.99
	SR227 - Should aesthetics and wattage loads be of primary importance, then the SR227 is the way to go. This module replaces any existing wall receptacle outlet and responds to commands from any X10 controller. Details: X10 control on top, bottom outlet is always live! In areas of your house that have high visibility , use X10 Wall Receptacles for a clean, finished look. The control components are built-in, so Lamp Modules are not necessary. Features a controlled outlet at the top of the receptacle, the lower outlet is not controlled. Both outlets are rated at 15 amps. Responds to ON/OFF and ALL UNITS OFF, but not to ALL LIGHTS ON or DIM/BRIGHT commands. Controlled devices may still be turned off and on with their own switches. Features: Rated at 15 amps and 1800 watts unrestricted load. $15.99
	SS13A - This super sleek, super thin and light weight, wireless remote wall switch adheres to any surface! Easy single push-button programming has your SlimLine set for each button to control a different lamp or appliance! Now you have the dream switch you always wanted, in the perfect location! $19.99
	WS12A - Wire-in modules for incandescent lamps. Ideal for controlling bedroom, living room, and family room ceiling light fixtures. Indoor and outdoor fixtures connected to this switch can be dimmed locally and by X10 controllers. $19.99
	WS467 - Upgrades your existing standard single pole wall switches. For automation of indoor/outdoor lights including front porch, patio, hallway, and stairway lights. $12.99
	WS4777 - For remote and local X10 control of two or more switches that operate the same light, upgrade your existing switches with the 3-Way Wall Switch Set. Each light requires a master switch, plus one slave switch for each of the additional control points of the same light. Push button ON/OFF control of incandescent lights up to 500W. Responds to ON/OFF, DIM/BRIGHT, and ALL LIGHTS ON/ALL UNITS OFF by X10 signal. Rated at 500 watts (incandescent). Dimmable through X10 controllers. $15.99
	Description: Includes (1) TM751 and (1) KC674. Works with X10 modules for all your home remote control needs. Transceiver unit operates as a module to give you immediate control of any lamp or appliance that is plugged into it. The keychain transmitter operates 2 units or up to 4 macros with ActiveHome two-way computer interface. Ideal for turning on or off your front porch and hallway lights from the driveway. Features: Plug-in, wireless, battery operated transmitter, 40' RF range, and other X10 modules for complete home control. Additional KC674 can be ordered to expand your system! $24.99